Best Viewed in Mozilla Firefox
Arthur Zatarain
An expert witness resume or cv documents the basic experience and qualifications of the candidate. The engineer
qualifications include a batchelor and masters degree, but may not include a phd. A masters degree indicates advanced
study as well as a thesis, which may be published. A cv can also list publications and testimony experience, although
that may be deferred until required by opposing counsel.
Expert Witness
An expert witness for engineer or engineering engagement can related to a variety of
disciplines that are not directly related to the engineer college degree, such as batchelor or masters. The phd
is even less connected becasue it tends to be very specific rather than generalist. An expert witness engineer should
have a resume or cv that includes industry experience in equipment, electrical engineering, electrical power, or contrl
systems. Industrial automation is also useful for an expert witness with testimony experience.
An expert witness or exprt witnes is useful for a variety of litigation and commercial matters such as
intellectual property, patents, accident, or damages. A commercial dispute related to a contract or specification
intreperation is another example where an expert witness is useful.
Arthur Zatarain has experience with lockout tagout LOTO, emergency stop E-stop, and steam turbine control systems.
The systems may use a programmable controller PLC, and may have intellectual property such as a patent, trademark, or copyright.
Industrial accidents can be investigated with a report prepareed to indicate forensic analysis of the accident. Inspections
can also be provided for water damage and flood damage to equipment such as printers, assembly lines, recycling equipment,
and integrated circuit placement machines.
Board of directors
Arthur Zatarain has experience working with board of directors at both public and private company. Appointment
to board of directors is associated with experience in engineering, design, manufacturing, and field service for
a variety of industries. Indirect experience is often useful for a board of directors appointment because it
can bring fresh views into stale management environments. Election as a director is done by stock holders who
often take recomendation of the nomination committee.
Management consulting can be performed by an engineer with executive experience. That experience can be
with a public company or a private company. The engineering management experience is useful for business management consulting
for matters involving technical issues such as manufacturing, systems integration, and project management. Product development
consulting is also based on experience developing and manufacturing engineered products.
Artzat Consulting is owned by Arthur Zatarain, PE in Metairie Louisiana,
a suburb of New Orleans Artzat provides consulting and expert witness services
to attorneys, insurers, and end users. Typical projects relate to equipment,
automation, instrumentation, and control systems. Service is available nationwide
with engineering licenses held in Louisiana, Alabama, California, and Alaska.
Forensic Engineer
A forensic engineer performs analysis and reporting on technhical matters
that are typically being pricessed through some form of legal matter. However,
a legal environment isn't required for a forensic examination. The analysis
may be performed merely to determine the cause of a specific event or condition.
For example, a forensic examination may be made on a control system to determine
why an accident occured, or why a system did not perform as expected. The
forensic analysis may be of software code such as ladder lofic in a PLC,
or it may involve hard wired relay logic, electrical controls, power distribution,
or instrumentation. Forensic engineering is therefore useful in a variety
of situations regardless of the legal entanglement.
Industrial Equipment
Typical equipment includes programmable logic controller PLC, distrubited
control system DCS, and electric relay logic. PLC systems use ladder logic
for most operations, while a DCS will often use function block programming.
The concepts of PLC and DCS have merged into a unified control platform based
on open architecture interfaces. The use if ladder logic is widespread due
to its earlier application to relay logic circuits.
An expert witness is used to investigate and evaluate the technical and
commercial aspects of accidents, intellectual property, and commercial matters.
Artzat consulting can assist clients in all these areas, with experience
with steam boilers, paper mill, steel mill, burner management, and telemetry
scada. Other areas include medical devices, flow measurement, meters, power
distribution, and refridgeration.
Expert Witness Services
Expert witness can be provided in any state, with experience in Louisiana,
California, Alabama, and Alaska. Other states include North Carolina, Olkahoma,
Illionis, and Indiana and Texas. Michigan has also been served, with the
states of Washington, Colorado, Oregon, and District of Columbia DC. Any
state such as New York or New Jersey can also be served by expert witness
service. Professional credentials are important, such as licensed engineer
or registered engineer. Also importnat is a masters degree in engineering
or similar field. A phd is not a necessity for an expert witness because
career experience and expert witness experience is more useful to the client
than a phd with no relevant experience.
product Liability
A forensic engineer is useful for matters of product liability and product defects.
Artzat Consulting has experience with product liability for industrial and commercial
equipment. Product liability has also been analyzed for control systems, programmable
controllers, ladder logic, and engineering design. Product liability can result from
an original product manufacturer oem, or from a systems integrator who combines components
into a complete system.
Forensic Engineering Locations
Service in Louisiana, Mississippi, Texas, and Alabama is efficient due
to the proximity of Metairie to those areas. However, an airplane will take
Artzat anywhere within the USA in a matter of hours. Travel to Alabama areas
such as Birmingham or Montgomery or Mobile is easy, with Huntsville also
accessible by car. Visits to Houston, Dallas, San Antonio, and Austin are
also less than one day away by car. A phd is not unusual for an expert witness,
but is not really important when compared to real life experience with equipment,
controls and automation with PLC and DCS control system equipment.
Service in California includes Los Angeles, San Francisco, and San Diego
as well as outlying Bakersfield and Antioch. Seattle is a bit far, but the
airline does most of the heavy lifting. Travel to New York NYC occurs easily
on JetBlue and Delta. Once in NYC the entire tri-state area is easily accessibls,
as is upstate new york.
Service to New England is welcomed, so please inquire with your technical
requirements for an expert witness. Travel to new England such as Boston
is by JetBlue, or other carriers, which can then lead to other New England
cities.
Engineer for Machine Accident
An engineer ma be required to serve as an expert witness or forensic
for a machine accident such as with a conveyor, power press, steel mill,
or extraction machine. The instance could be an equipment accident, or it
could be a process accident. A typical example is an expert engineer for
a manufacturing accident. This could be an expert engineer or forensic engineer
in an assembly plant, or an expert engineer in a production line or on a
vehicle assembly line.
Oilfield accident
An expert engineer can be useful to evaluate an oilfield or oil and gas
accident. Those events may include oil and gas or the related products such
as water, co2, h2s, and sulfates. The accidents occur on oil wells, gas
wells, pipelines, storage tanks, and production vessels such as separators,
treaters, waste heat recovery units, and water treating facilities. Such
events can be generally divided into an oil and gas drilling accident or
an oil and gas production accident. An oilfield accident requiring an expert
engineer can occur onshore of offshore. The expert engineer can be for control
system, production system, safety system or automation system, or instrumentation.
The system can be electrical, electric, electronic, hydraulic, and pneumatic.
A computer control system can also require an expert engineer. An industiral
engineer can also be used if the matter involves safety and production systems.
Automatic control
An expert engineer may be required for an accident involving automatic
control. That expert could be for electrical engineer, control system engineer,
or automation engineer. A mechanical engineer or someone with experience
with mechanical engineering can also be useful for an automatic control
accident. A certified systems integrator is someone who can be an expert
engineer for automatic control. The systems integration involves combining
multiple equipment and techology into a single control system. This involves
design, programming, fabrication, testing installation, and maintenance.
industrial accident
An industrial accident may require an expert engineer or forensic engineer
to analyze and evaluate the control system connected with the event. The
accident may have nothing to do with the control system. Still, a forensic
engineer may be required to analyze the system to determine that the control
system was not af fault.
Equipment accident
An equipment accident can require an expert engineer or expert witness
to help evaluate the circumstances and situation including the mechanical
and electrical components of the equipment. This can be industrial equipment,
process equipment, manufacturing system, commercial equipment such as heater
or dryer, or pump and compresssor. Industrial equipment is also a flow meter,
electrical switchgear, control switch, button, and instrumentation. End
devices are pressure, temperature, level, and other physical measurement.
Many equipment is used for food production, packaging, transportation, storage,
and conveyor. Metal processing such as steel mill, paper mill, refinery,
petrochemical, and tank farm. Vehicle can also be equipment itself, or it
can contain devices related to an equipment accident.
